I installed the Day Maker headlight, and it looks like it is pointing at the sky, especially on high beam. I called the dealer and they said to bring it in and they would try and see what is wrong with it. But 80 dollars per hour. Could the adjustment just be off a little, and if it is what is the easiest way to adjust this?
Verify that the slots and tabs in headlamp, retainer ring and bezel are aligned. On my Limited, I did need to adjust the alignment after installation using the alignment screws on the mounting bracket. Yours may be different. The instructions call for - Adjust the headlamp alignment per service manual instructions, then tighten the headlamp mounting fasteners to 25-30 ft-lbs (33.9-40.7 Nm).
Here is a link to Install sheet for one of the other Day Maker headlight that shows Alignment procedures. Yours may vary, so refer to the service manual when in doubt.
1 year, 8 months ago